二維碼
The two lugs of the pinhole on the steering knuckle are connected with the fist part at both ends of the front axle through the kingpin, so that the front wheel can deflect around the kingpin to make the car turn.
To reduce wear, a bronze bushing is pressed into the knuckle pin hole and lubricated with grease injected by a nozzle mounted on the knuckle. To make the steering flexible, a bearing is arranged between the
steering knuckle and the fist part of the front axle. An adjusting gasket is arranged between the upper ear of the knuckle and the fist part to adjust the gap.
